![]() WARNING: Allow 24 hours for the glue to harden thoroughly before installing your screen.ĭIY Adjustable Window Screens adhere to your window frame on all 4 sides by a continuous strip of 20mm width self-adhesive VELCRO® Brand fastener providing a slim and discreet appearance.The VELCRO® fastener will eventually come away from the window frame if sufficient pressure is not applied, and if this happens it cannot be reused.By applying pressure this activates the ‘Pressure Sensitive Glue’, so it is important to pay special attention to the corners as these are often missed.Apply pressure to the strip of the installed VELCRO® fastener with a teaspoon or similar utensil.Continue down one side of the window frame peeling back the strip liner as you go.Hold the VELCRO® fastener strip on the edges between your thumb and forefinger, & gently peel back the liner (without touching the glue) to about 25mm (1″) and place in position on the window frame.WARNING: Do not touch the adhesive strip with fingers, and ensure your scissors are clean and sharp.If the temperature is low, warm the frame and the VELCRO® Brand fastener with a hair dryer, or fan heater in an effort to increase the bond. Do so when the room temperature is 18☌ or higher in non-humid conditions. Carefully fit the self adhesive VELCRO® Brand fastener onto the now clean & dry surface.Use an alcohol base cleaner as a final wipe to ensure that the surface is spotless, allow to dry.Clean the surface of your window frame to remove any dust, grease, or oil.your new DIY Velcro Window Screens will arrive with simple install instructions, no tools or tradesmen needed.ĭIY Adjustable Window Screens are suitable for any windows old or new and for any window type sash, awning, casement, hopper, and slider. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |